Home » Productions »
Sewage & waste Drainage & Sewerage systems
Wide range of non-pressure systems for design and construction of storm water, domestic and industrial sewerage pipelines based on PE and PP pipes.
Productions
Home » Productions »
Sewage & waste Wide range of non-pressure systems for design and construction of storm water, domestic and industrial sewerage pipelines based on PE and PP pipes.
Leak integrity during operating life not less than 50 years
Resistance to dynamic and static load
Reliability at ground movement, seismic resistance
High chemical resistance, no corrosion, no biofouling and significant deposits
High wear resistance
Wide range of fittings and manholes
Various engineering solutions for collection, treatment and disposal of wastewater available
Easy assembly, reliability and operating efficiency
RIDGEPIPE
|
CORSYS series
|
PERFOCOR series
|
Pragma
|
SPIROLINE
|
CORSYS PLUS
|
CORSYS ARM
|
|
|---|---|---|---|---|---|---|---|
 Diameters
DN/OD, mm |
110-400 | 110-1200 | 75-630 | 160-630 |  |
|
|
| Diameters DN/ID, mm |
|
200-1000 | 200-600 | 200-1000 | 360-2800 | 1200-3000 | 800-2400 |
 House drainage |
 |
|
|
|
|
|
|
 Sub-sewers, connections to the main sewers |
|
|
|
|
|
|
|
 Main sewers (main culverts) |
|
|
|
|
|
|
|
 Storm water |
|
|
|
|
|
|
|
 Land and building drainage |
|
|
|
|
|
|
|
 Drainage systems |
|
|
|
|
|
|
|
 Low pressure piping systems (up to 0.5 MPa) for siphons, water intakes, deep-water outlets, etc. |
|
|
|
|
|
|
|
 Pipeline renovation even under operation |
|
|
|
|
|
|
|
 Relining |
|
|
|
|
|
|
|
Wide range of standard and custom-made manholes available, even for the most challenging projects.
POLYPLASTIC knife gate valves are designed for flow shut-off in wastewater and industrial pipeline systems. Their key design advantage is a full bore in the open position, ensuring minimal pressure loss. A reinforced sealing system provides tight shut-off in both flow directions, while the saddle design prevents deposit build-up and ensures stable operation in demanding conditions.
Valves with metal-to-metal sealing are used for flow shut-off in non-aggressive media such as sewage, raw water, and grey water. The full bore design ensures minimal head loss and reliable performance.
Knife gate valves are suitable for both full and partial flow control. The modular design allows for flexibleconfiguration and adaptation to specific project requirements.
POLYPLASTIC air valves are designed to protect pumping stations and pipeline systems from damage caused by air accumulation or vacuum conditions.
Check valves prevent reverse flow, protecting pumps and pipeline infrastructure. These solutions are engineered for reliable operation and require minimal maintenance.
POLYPLASTIC fittings include a wide range of solutions for pipeline connection and installation:
These components simplify installation and maintenance processes, ensuring reliable connection of pipeline sections and ease of equipment assembly and disassembly.
Reservoirs are designed for storage of grey water, non-potable liquids and fire fighting water storage.
Surface water treatment units are designed for cleaning drainage water to the discharge standards for city sewage or other water sites of category I and II.
Disposal of surface flow is conducted in accordance with Water Code of Russian Federation, Federal Law of Russian Federation “On environmental protection and requirements towards surface water protection. Disposal of drainage water must be done with the compulsory treatment of drainage water depending on the conditions of the discharge.
Customers feasibility study of the design solution in terms of maintenance and operation.
Design organisations selection of project solution to the technical requirements towards treatment of waste water, positioning of water treatment unit upon the design, selection of properties depending on the load, calculation of the quality of treatment.
Construction companies services of supervision installation, technical consulting during construction
