Gas distribution systems

Gas distribution systems based on PE pipes. Packing covers prevent contamination during transport and storage.

General Product
Catalog

Leak integrity during operating life not less than 50 years  i The service life can exceed 100 years at a transported medium temperature below 20 °C, operating pressure below the design pressure, and absence of mechanical damage during installation and operation.

Resistance to dynamic and static loads, seismic resistance

High chemical resistance, no corrosion

Does not require pipeline electrochemical protection and earth currents

Reduced installation timescales comparing to steel pipes

Flexibility and low weight

High UV resistance during storage

Wide range of SDR is available on demand

Determination of safety factor for maximum operating pressure

Maximal operating pressure, MPa Calculated safety factor, C
PE 100 pipes (MRS 10.0 MPa)
SDR 26 SDR 21 SDR 17.6 SDR 17 SDR 13.6 SDR 11 SDR 9
0,3 2,6 3,3 4,0 4,1 5,2 6,6 8,3
0,4 2,5 3,0 3,1 3,9 5,0 6,2
0,6 2,6 3,3 4,1
0,8 2,5 3,1
1,0 2,5
1,2 2,0
 
PE 100 GAS
PROTECT GAS SERIES
MULTIPIPE GAS SERIES
Diameters
DN/OD, mm
20-1200 63-1200 63-1200
SDR 9; 11; 13.6; 17.6; 21; 26 9; 11; 13.6; 17.6; 21; 26 9; 11; 13.6; 17.6; 21; 26
Pipe material PE 100 PE 100 / PE 100-RC PE 100 / PE 100-RC
Standarts GOST R 58121.2 GOST R 58121.2
PAS 1075
GOST R 58121.2
PAS 1075

Advantages

Resistance to point load
Can be installed in narrow trenches
Enhanced scratch resistance

Application

Gas distribution systems for standard installation
Gas distribution systems for alternative installation
Pipelines renovation




Wide range of transition pieces for PE / Steel connection are available.

To transit through the concrete structures and plastic manholes walls it is using EPDM sealing rings.