Inspection chambers

Designed for installation and inspection of lock-adjusting valves, as well as for a number of other technical solutions.

Example 1.

Inspection chamber with diameter (OD) of 1000 mm, well pit height of 1500 mm, input / output are made of a smooth pipe with diameter of 110 mm. At the customer’s wish the diameter of the well can be greater than the diameter of the shaft pipe, which provides additional anchoring when mounting the well, especially in water-saturated soils.

Photo 1 — Welded inspection chamber
Photo 1 — Welded inspection chamber

Photo 2 — Inspection chamber, top view
Photo 2 — Inspection chamber, top view

Example 2.

Inspection chamber with inside pit diameter (ID) of 1400 mm, well pit height of 1750 mm, inputs / outputs are made of smooth pipe with diameter of 110 mm. Lock-adjusting valves and ladder are installed in the inspection chamber, this design can be used in water supply systems and in pressure sewage (photo 3).

Photo 3 — Welded inspection chamber (ID) 1400 mm
Photo 3 — Welded inspection chamber (ID) 1400 mm

Photo 4 — Inspection chamber, top view
Photo 4 — Inspection chamber, top view

Figure 1 — Inspection chamber drawing (ID) 1400 mm
Figure 1 — Inspection chamber drawing (ID) 1400 mm